Modena BZ 1005, User Manual Book

Page: 13 / 33

13
- iSI = Stop phase set point, referred to the insert probe
- Back to the room temperature.

How to modify the room set point
While rSI or iSI are displayed hold pushed the SET button till the rSi or iSi label start flashing and
LED near the SET button is turned on. Use the arrow button to modify the value and the SET button
to confirm it.

Buttonboard when the holding cycle is running (H)

How to display the holding (regulation) set point
While the holding cycle is running, (H icon lighted), push the SET button and the holding
set point is displayed on the UPPER display while the
SETH label on the bottom display.

How to modify the room set point
While SETH is displayed hold pushed the SET button till the SETH label starts flashing
and LED near the SET button is turned on. Use the arrow button to modify the value and
the SET button to confirm it.
To confirm and exit : push again the SET button.

Other buttons