Modal Electronics Cobalt 5S, User Manual

Page: 10 / 41

18 19
UI Combinations
FX
• Press the ‘FX’ switch once (so that the FX LED is statically illuminated) for the ADSR and
Depth controls to adjust the Chorus FX parameters. Press the ‘FX’ switch a second time
(so that the FX LED is flashing) for the ADSR and Depth controls to adjust the Delay FX
parameters. Press the ‘FX’ switch again to return to the Chorus parameters.
• When the Delay FX is selected, turn the ‘A’ encoder into the negative range to access
synced delay times.
Global Settings
• When the screen is displaying the ‘Reset’ option, press the ‘Edit’ switch and follow the
confirm instructions to reset all global settings to the factory default settings. Please note
that this will also reset the Main Volume and Tempo parameter values but your presets
will be unaffected
• Hold the ‘Patch’ switch and turn the ‘Volume’ encoder to control the Patch Gain
parameter.
Screen Parameter List
• If a screen parameter is crossed out this means that it is ‘inactive’ (and can’t be controlled)
due to the value or state of other parameters or settings.
• If a screen parameter value is underlined to indicate the currently selected value, you will
need to use the Edit encoder switch to apply newly selected values.