SECTION 3 – Mount Components to Terminal Strips
Please refer to DRAWING 4.
9
Strip and tin a 1 ¼” piece of wire and connect lug 1 of the left 50k pot to the top
hole of #14.
Solder the connection at lug 1 of the pot now.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Strip and tin a 1 ¾” piece of wire and connect lug 2 of the left 50k
pot to top hole of #12.
Solder both connections now.
Strip and tin a 1 ½” piece of wire and connect lug 1 of the right 100k pot to
top hole of #11.
Solder the connection at lug 1 of the pot now.
Connect a .033
µF
capacitor from the top hole of #9 to lug 3 of the right 100k
pot.
Solder both connections now.
Connect a 10k resistor from the top hole of #14 to the top
hole of #13.
Solder the connection at #14 now.
Connect a .22
µF
capacitor from the top hole of #13 to the top hole of #3.
Solder the connection at
#13 now.
Connect a 15k resistor from the top hole of #4 to the top hole of #5.
Connect a .22
µF
capacitor from the top hole of #5 to the top
hole of #11.
Solder the connection at #11 now.
Connect a .22
µF
capacitor from the top hole of #6 to the top hole of #10.
Solder the connection at
#10 now.
Connect a 270 ohm resistor from the top hole of #7 to the lug #8.
Solder the connection at #8 now.
Strip and tin a 1 ½” piece of wire and connect the positive lug of the DC power jack to the top
hole of #4.
Solder the connection at DC jack now.
Connect the PF5102 JFET to the top holes of #2, #3 and #4 as listed:
Top Hole #2: Gate
Top Hole #3: Source
Top Hole #4: Drain
PF
51
02
D
S
G
Solder all three connections now.
lower section
top hole
CENTER
PIN LUG
POSITIVE
SWITCH LUG
POSITIVE
LUG
1
2
3
Connect the 2N5088 transistor to the top holes of #5, #6 and #7 as listed:
Top Hole #5: Collector
Top Hole #6: Base
Top Hole #7: Emitter
2N
50
88
E
B
C
Solder all three connections now.
Locate the battery clip. Connect the red wire to the positive-switch lug of the DC power jack.
Connect the black wire to the ring lug of the input jack.
Solder both connections now.
Connect a .0068
µF
capacitor from the top hole of #13 to lug 1 of the center 50k pot.
Solder
the connection at lug 1 of the pot now.
