Strip and tin a 3 ½” piece of wire and connect lug 7 of the footswitch to lug 2 of
the right 100K pot. Run the wire beneath the turret board.
Solder both
connections now.
Strip and tin a 1" piece of wire and connect lugs 3 and 9 of the footswitch.
Solder
both connections now.
Strip and tin a 1 ¾” piece of wire and connect lug 2 of the footswitch to the input jack's
tip lug.
Solder both connections now.
1
2
3
4
6
7
8
9
C
g
A
C
r
5
Strip and tin a 1 ¾” piece of wire and connect lug 8 of the footswitch to the output
jack's tip lug.
Solder both connections now.
Strip and tin a ½” piece of wire and connect lug 4 of the footswitch to the C
g
LED
pin of the footswitch.
Solder both connections now.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Connect a 1k resistor from #1 to the lower section of #3. Wrap
the lead around the lower section of the turret.
Solder the lower
section of #3 now.
Connect a 1M resistor from #4 to #6. Wrap the leads around the
lower section turrets.
Solder the lower section of #4 now.
Connect a 100k resistor from #6 to #8. Wrap the leads around
the lower section turret.
Solder the lower section of #6 now.
Connect a 1k resistor from #1 to lug 3 of the left 50k pot.
Solder
the connection at lug 3 of the pot now.
Strip and tin a 1 ¾” piece of wire and connect the center pin
lug of the DC jack to #1.
Solder both connections now.
Connect a .22
µF
capacitor from lug 1 of the footswitch to the top
hole of #2. The capacitor’s body should be facing down.
Solder
the connection at lug 1 of the footswitch now.
Strip and tin a 2” piece of wire and connect lug 3 of the right 100k pot to
#8
Strip and tin a 2 ¼” piece of wire and connect lug 5 of the footswitch to
#8.
Solder the connection at lug 5 of the footswitch now.
Connect a 1k resistor from #4 to the A pin of the LED footswitch.
Wrap the lead around the lower section of the turret.
Solder the
connection at the A pin now.
Connect a 33k resistor from #12 to lug 2 of the center 50k pot.
Wrap the lead around the lower section turret.
Solder the lower
section of #12 now.
Strip and tin a 1 ¼” piece of wire and connect lug 2 of the center 50k pot to the top hole of #10.
Solder the connection at lug 2 of the center 50k pot now.
Strip and tin a 1 ½” piece of wire and connect lug 3 of the center 50k pot to the top hole of #9.
Solder the connection at lug 3 of the center 50k pot now.
1
2
3
SLEEVE LUG
TIP LUG
Output Jack
RING LUG
SLEEVE LUG
TIP LUG
Input Jack
CENTER
PIN LUG
POSITIVE
SWITCH LUG
POSITIVE
LUG
lower section
top hole
8