10
SECTION 4 – Finishing Up
Fasten the knobs to the potentiometer shafts by tightening their set screws. Install a 9 volt
battery if needed. Fasten the cover using the four screws provided. Plug your guitar into the
input jack on the right side of the pedal. This turns power on when you are not using an AC
adapter for power. Plug another cable from the output jack (left side) to your amp's input.
When using a battery for power, remember to unplug from the input jack of the pedal to turn it off
and save battery life.
It’s always a good idea to thoroughly double-check your connections before applying power. This
will minimize the risk of damaging components.