Page 6
MOCET IP3032-E Standard IP Deskphone Quick User Guide
(2) If your Ethernet Switch doesn’t support PoE:
-
Please connect an Ethernet cable to the Switch port from
LAN port of the
IP3032-E.
- Plug in the IP3032-E power adaptor* to the wall power outlet then plug the barrel
plug to the power port
on the back of the phone. You should see the phone
LEDs and buttons light up momentarily and the phone will boot.
To eliminate the requirement for multiple Ethernet cables to an user’s location, the user’s
computer can be connected to the network through the second Ethernet port on the
IP3032-E.
Notice :
1. The IP3032-E takes just under two minutes to start up and becomes operational.
There are a series of LED and buttons that will light up periodically to provide boot
progress information. Please be patient.
2. The IP3032-E does not ship with a power adapter. If you are not using Power over
Ethernet (PoE), you must order the power adapter separately from MOCET.
Do not use other power adapters. Use only the MOCET IP3032-E
Power Adapter with your IP3032-E IP Phone. Adapters for other
devices may damage IP3032-E IP Phone.
CAUTION
