Page 5
MOCET IP3032-E Standard IP Deskphone Quick User Guide
Hardware Installation
Attaching the Stand to the Phone
Please read “IP3000 IP Deskphone Stand Installation Guide” first before installing the
stand on your phone.
Connecting the Handset to the Phone
Connect the handset to the curly handset cord and then connect the other end of the
curly handset cord to the port marked HAND with the handset icon on the bottom of the
IP3032-E.
Connecting the Ethernet Cable
Using a general CAT-5 Ethernet cable, follow the installation steps below:
(1) If your Ethernet Switch supports PoE:
-
Please connect an Ethernet cable to the Switch port from the LAN port of the
IP3032-E. Then you will see the phone LEDs and buttons light up momentarily and
the phone will boot.
