USER MANUAL | M1000-M-DA3
USER MANUAL | M1000-M-DA3
For example, if you are setting up for the driver’s position
as optimal performance, then drag all speakers to
roughly where the driver’s head will be. If you are
setting up for a well-centered sound for all to enjoy,
then drag your cross hairs to a centered position just at
the edge of the dashboard (Individuals like a different
sound position so this is only a recommendation).
Individual Speaker Time Alignment
Time Alignment helps to make sure the sound from
each speaker arrives at the desired listening position,
all at the same time. Normally a measuring tape is
required for this task, which you can do with our system
BUT for ease and speed of setup, we have devised a very
simple ‘drag & drop’ cross hair time alignment system.
Choose the speaker you want to align, and then drag the
green cross hair (FIG 05 pictured in the vehicle image)
to the desired listening position.
FIGURE 04
In FIG 04 we can see
that we have enabled a
3-way system and
checked the box for
the watermark. We
have also bumped up
the gain a little on the
tweeter and we can
now see on the graph
that the Eq point we
dropped in at 4 KHz
has now started to clip
(illustrated by the flat
line across the top of
the graph). You want to
avoid this ‘clipping’ at
all costs! This will
cause damage to your
speakers.
PAGE 12
PAGE 11
FIG 04
CHANNEL EQ
CONNECTED
0.00Hz
Default
Preset 01
12dB
50Hz
100Hz
500Hz
1KHz
10KHz
5KHz
20KHz
6dB
0dB
-6dB
-12dB
-18dB
-24dB
DELETE
CLEAR
FREQ
0.00Hz
0.00Hz
MAG
0.00Hz
0.00dB
CHANNEL GAIN
0.00Hz
0.00dB
Q-FACTOR
0.00H
0.01
0.00Hz
0.01
Q-L/R
CHANNEL
WATERMARK
CONFIGURATION
Channel Equalizer with watermark
FRONT LEFT TWEETER
FILTER SETTINGS
0.00Hz
High Pass
0.00Hz
0.00Hz
FILTER TYPE
Lo-P SLOPE
Lo-P Hz
INVERT PHASE
XOVER L/R LINK
TIME ALIGNMENT
0.00Hz
0.00ms
0.00Hz
0.00ms
20
6 dB
0.00Hz
Butterworth
0.00Hz
0.00Hz
FILTER MODEL
HI-P SLOPE
Hi-P Hz
2000
24 dB
1
6
7
2
3
4
5
3 WAY SYSTEM ENABLED
CLIPPING WITH
GAIN BUMPED UP