Mobridge DA3 User Manual Download Page 3

Congratulations on your purchase of a mObridge DA3 Pre-Amplifier.  mObridge 
prides itself on striving to develop and manufacture products to the highest 
engineering quality standards and seamlessly integrating these products with 
factory audio visual systems. 

The Graphical User Interface (GUI) for the DA3 allows for complete control and 

tuning of your DA3 unit, with a 1024 point parametric equalizer for each channel, 
time alignment, phase adjustment as well as channel summing for ‘mono’ usage 
such as with a  subwoofer or centre channel.

This manual will explain how to use this GUI to maximize your listening experience.
The GUI is available for both PC & MAC, and can be downloaded from our website. 

We hope you enjoy your new enhanced listening experience!

Welcome

Common Install Notes

01

 Prior to commencing any installation! Some vehicles may need to be coded for the 

M1000-M-DA for correct operation. Coding Notes for your individual vehicle can be 
found in the Quick Installation Guide.

02

 Initially, please set the gain controls on your analogue amplifiers to minimum. This 

will reduce noise significantly and allow your amplifiers to run smother for longer. NB: 
We recommend that you use the M1000-M-DA gain control as your master set up gain.

IMPORTANT

2016 Fiberdyne Systems Pty 

WWW.MOBRIDGE.US 

 Disclaimer

1)

 Dolby Digital, DTS and other proprietary digital formats are not supported by the DA series of products.  

These features require licensing from Dolby, DTS and other manufacturers to support these features

2) Vehicle Coding

 Some vehicles may require coding.  Fiberdyne Systems Pty Ltd endeavors to be 

aware of which vehicles and procedures are required for this by producing vehicle manufacturer 

installation notes. However we will not be responsible should third party diagnostics tools be required 

and nor we will be responsible for the costs involved in this coding or any monetary costs incurred either 

from third party diagnostics specialists/dealers or directly from consumers or installation specialists.

3) Vehicle features

 Whilst Fiberdyne Systems Pty Ltd endeavors to develop products that seamlessly 

integrate to the existing vehicle infrastructure we will not be held legally responsible should some OEM 

vehicle features not operate as intended. Please be aware that Fiberdyne Systems Pty Ltd does not have 

access to OEM vehicle data bases. When fitting a DA product to the vehicle some features such as 

Bluetooth echo, volumes on specific sources such as Nav, Voice and Reverse Park distance may differ 

from the factory amplifier and this is due to end of line vehicle configuration at the manufacturers factory.

Summary of Contents for DA3











Reviews: