MOBISAT
®
TITAN - User Manual v.2.0.3 - www.mobisat.eu - Page 14 of 16
THEFT PROTECTION - AUTOGEOFENCE
TITAN is equipped with a technology that allows you to be notified promptly in case of
theft.
The alarm is activated:
▪
Whenever the ignition key is removed from the vehicle
▪
Whenever the iButton
®
is removed from the vehicle (if the vehicle is turned
off and an iButton is installed)
In case of lifting, dragging, etc., TITAN recognizes a theft the moment its position is detected at a distance greater than 500m from
the point where the vehicle was parked. 500 metres is the length of the virtual fence radius, as the default factory setting. The
extent of the radius can be changed by the user as desired (see below).
We recommend not changing the amplitude of the Autogeofence radius in order to prevent the triggering of "false alarms." False
alarms can be generated in cases where the vehicle on which TITAN is installed is parked indoors or in a shaded area (where the
satellite network is inaccessible).
Caution: in case of theft call 112 or 113, communicating to the police the vehicle's location in real time (using the App: Greenbox).
If you are able to provide real-time information on the location of a stolen vehicle, law enforcement officers are required to take
steps for its immediate recovery.
AUTOGEOFENCING CONTROLS
TITAN sends each alarm to the Mobisat
®
Greenbox service and your Smartphone via a push notification (if the Greenbox APP is
installed on the Smartphone and if push notifications are enabled). It is advisable to configure the product to also send 1 SMS in
case of theft (in the event that the Internet connection on your Smartphone is not active). A mobile phone number at which to send
the theft alarm must be indicated in TITAN. This is done by sending the command:
<space><space>
setparam
<space>
150
<space>
number at which to send the alarm.
The number to which the alarm should be sent MUST ALWAYS be indicated with the country code without ZEROS and without the
"+ " sign.
For example, if the phone number to which the alarms should be sent is 123456789 and the country code is 0039 (Italy), the
command issued would be the following:
<space><space>
setparam
<space>
150
<space>
39123456789
AUTOGEOFENCE SETTINGS
COMMAND
SMS TEXT
ENABLE AUTOGEOFENCE
<space><space>
setparam
<space>
1101
<space>
1
IF AN iButton
®
IS INSTALLED
<space><space>
setparam
<space>
1100
<space>
1
IF NO iButton
®
IS INSTALLED
<space><space>
setparam
<space>
1100
<space>
0
SEND AN ALARM WITH HIGH PRIORITY
<space><space>
setparam
<space>
1103
<space>
1
VIRTUAL FENCE RADIUS
<space><space>
setparam
<space>
1105
<space>
500
SEND AN ALARM IF THE VEHICLE IS OUTSIDE THE
FENCING
<space><space>
setparam
<space>
1104
<space>
2
CUSTOMIZE THE AUTOGEOFENCE MESSAGE.
N.B.commas are part of the message and should
be included.
<space><space>
setparam
<space>
135
<space>
1,0,AUTOGEOFENCE!