11
11. CONTINUOUS MODE - ON / OFF SWITCH
1. Press and hold the programming button on the
MOBILUS C-MR
receiver until the connected
actuator executes one sequence of noticeable and audible micro movements down / up confir-
ming the receiver’s entry into the programming mode (every 1 sec the LED flashes).
2. Press programming button in
COSMO C-MR
module three times,
at short intervals. The module will
confirm the change mode by multiple
beep sound and switching relays.
After changing the operating mode,
the module will exit from the PRO-
GRAMMING MODE. -
Fig.11.1b.
Fig. 11.1
b
x3
a
To deactivate CONTINUOUS MODE - repeat the procedure in steps 1 and 2.
IN THE CONTINUOUS MODE, the function of the button connected to terminal
S1 / S2
changes.
The button acts as a light switch - the switch under the terminal
S1
activates the relay in the
UP
direction, when the button is off, the relay turns
OFF
. Switched under the
S2
terminal works
analogically - in the
DOWN
direction.
Fig. 11.2
L1
N
PE
230V~ 50Hz
L1
N
PE
230V~ 50Hz
L1
N
PE
230V~ 50Hz
L1
N
PE
230V~ 50Hz
L1
N
PE
230V~ 50Hz
L1
N
PE
230V~ 50Hz
M
M
b
a
CONTINUOUS OPERATIONAL MODE
.
Illumination connected to inputs 2 and
6 - control with
DOWN
command.
