background image

03

PERIODIC INSPECTION & CARE

Wheels 

- Large rear wheels should be inspected 

at least once a month to ensure proper tightness. 

Check for wheel wobble or looseness.

General Care 

- Wipe chrome parts with a clean, 

soft cloth at least once a week. All metal parts can 

be cleaned with auto wax or similar products. If 

exposed to moisture, dry immediately. Do not use 

an abrasive cleanser that will scratch the finish.

USE & SAFETY

Wheel Locks

 - Engage both wheel locks before 

getting in or out of chair, leaning forward in chair, 

or while in an elevator or wheelchair lift. Locks are 

engaged by pushing handle completely forward. 

Adjustments to locks are made by loosening or 

tightening nut on the carriage bolt. Tighten nut 

and bolt to secure in position. Test for correct 

locking action before actual use.

Tyres

 - Solid  tyres need minimal maintenance, 

but should be cleaned occasionally with a damp 

cloth. Replace if tyres become severely worn or 

cracking appears.

Front Castors 

- Castors should be checked 

periodically and lubricated occasionally.

Removal of Swing away Foot Rests / Leg Rests

 - 

Release lock by pushing on the front rigging 

lever. Swing-away foot rest /leg rest out and 

sideways. Lift to remove.

Summary of Contents for M603MC









Reviews: