Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Control upon delivery
After unpacking the rollator please check if anything is missing, if all parts shown in the drawing have been
delivered. If any parts are missing, please contact your dealer immediately.
Unfolding the rollator
•
Place the rollator with the wheels on the floor. Grasp the black lock and tilt it up and
out of the tubes at the seat, the rollator unfolds. Then push the two tubes downwards
until you hear a click in the locking mechanism. The rollator is now unfolded and
secured against collapsing.
•
To be quite sure that the frame has been fully unfolded try to press the rollator
together
•
Check that the levers for height adjustment have been firmly tightened
•
Check that both handles are at the same height and stable
Use of a defective rollator is strictly forbidden
Always check before use the function of all parts of the rollator. If the above recommendations are not
followed, injuries may occur.
Folding the rollator
•
Pull the strap at the seat until the frame folds together
•
Now the rollator is folded together
Height adjustment of push handles
•
Press the adjustment button.
•
Adjust the height
•
Make sure that the adjustment button pops out again.
•
Make sure both push handles are adjusted in the same height.
Both handles should always be at the same height.
Adjust the height of the push handles so that the handles are at wrist height when the user stands next
to the rollator with arms vertically downwards. This means that the arms have
an angle of 20°- 30° when
using the rollator.
Rev. 25.03.22
13 - 20
UM-317001-02-MULTI_25032022.odt
Seat with release flap (pull here
to fold the rollator)
Star knob for folding
mechanism
Brakelever
Seat
Frontwheels
Shopping bag
Backbelt
Crutch holder
Rearwheels
Heightadjustment
(8 holes)
Push handle
