Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Fixed toilet seat raiser
Intended use of the device
The Mobilex Product is medical device which is
intended to be used by elder or disabled
persons only as a seating option and additional
support for toilet. Any other use is prohibited.
Safety requirements
●
Only use the product in fawless
condition.
●
If defects or errors are detected you
must immediately contact the dealer.
●
Be aware of the information on the
product label.
●
Only use the product for the purpose
which it is intended for.
●
Do not leave or store the product
outside.
Product description
The toilet seat raiser is easily ftted directly to
the toilet bowl. It attaches to the toilet bowl
with adjustable brackets. The sturdy easy to
grip arm rests ofer support to the user and
can be raised to allow side transfer. The
armrests can be folded back, and can be easily
removed. The seat can be removed for
cleaning.
Assembly description
Attaching the armrests
1. Loosen the screw in the middle of the
back part of the mounting bracket
which is located at the rear of the seat.
2. Slide armrests' tubes ends in to two
holes which are located on the sides of
the mounting bracket.
3. The armrests' tube ends diameters are
diferent. The “thinner” end must slide
in to “thicker” end.
4. Adjust the tubes, so the holes at their
ends are aligned with each other and
with the hole on the back of the
mounting bracket
5. Insert and tighten the screw in the hole
at the back of mounting bracket
Attaching the seat to a toilet bowl
1. Remove the existing toiled lid and
replace it with the Toilet Seat Raiser by
inserting the two threaded rods located
in the bottom of the mounting bracket
in to holes on the bowl.
2. Tighten using two plastic fxings.
3. Ensure that the toilet seat raiser is
correctly installed before use.
Transport recommendations
If it is necessary, Toilet Seat Raiser can be
easily detached from the toilet and transported
Accessories
There are no accessories provided for the Toilet
Seat Raiser
Maintenance
Normal dirt on metal and plastic parts can be
removed with standard household cleaning
agents. Check the specifc product information
and follow it during cleaning. Use only
commercial cleaning products which are
suitable for cleaning and disinfection (no
solvents or abrasives).
Despite the solid construction and the use of
resistant materials the product is subject to
wear. It is therefore recommended to let check
the product at regular intervals by a
professional.
Disposal of the product
The product can not be disposed of with
household waste but must be brought to the
local recycling centre.
Most common problems and solutions
Symptoms
possible cause
what to do?
The armrests are
unstable
The armrest
assembly isn't
fxed
Check armrest
assembly. Tighten
the screw
The device isn't
stable. It is
moving.
The fxing nuts in
the back are not
tightened.
Check the fxing of
the device to a
toilet. Tighten the
plastic nuts.
Technical data
Toilet Seat Raiser
301702
Total width
65,0 cm
Total length
47,0 cm
Width between armrests
54,5 cm
Seat height
10 cm
Internal width
21,0 cm
Internal length
26,5 cm
Total weight
4,0 kg
Max. Load
120 kg
Packing dimensions
49 x 41 x 26 cm
Rev. 12.2017
page 2 of 6
UM-301702-Multi
a better life in motion
GB
