MobileView 7000 Series, User Manual, Page: 39 / 67

MobileView 7000 Series User Manual
31
Accelerometer
The Accelerometer option configures how acceleration alarms are processed. Acceleration alarms are
also called Driver Behavior alarms since they are generally activated based on how an operator drives.
Each alarm represents a fixed acceleration profile. Hard Turn for example represents a lateral
(sideways) acceleration over a long period of time while Swerve represents the same lateral
acceleration over a short period of time. Hard brake uses a front to rear acceleration profile. Click the
check box to trigger an event or turn on the recorder fault LED.
CAUTION: Because acceleration alarms are dependent upon motion in defined directions,
device mounting orientation must be considered and configured. The Notifications G Sensor
section has additional information.
J1939 Message Type
J1939 messages can be grouped into types. Assign a 16 character descriptive name to each message
type. Message types can be used as a trigger for an event. The descriptive name entered here is used
wherever message type is referenced. Click Apply when completed.
Note: Only J1939 messages representing digital values (On/Off) can be used to trigger an event.
J1939 Type Assignment
Categorize J1939 messages into types. Up to 4 message types are allowed as shown in the drop-down
list next to each message. Messages of the same type can be used to trigger an event. Assign a type to
each message. Click Apply when completed.
Note: J1939 messages representing digital values (On/Off) are preceded with (D). Although
digital and non-digital messages can be assigned to the same type, only digital messages can be
used to trigger an event.
Network Settings
The network configuration settings are correlate to networking and remote devices accessed over
networks.
Auto Discovery
Auto Discovery sets the network destination for device discovery messages. Discovery messages
contain limited information about the recorder and location on the network. This information is used
by MobileView software to establish periodic and ongoing communications with the device.

LAN Discovery Server : Discovery messages are sent to network destinations connected to
the rear or wireless networks. The discovery message destination is defined by the server
configuration. LAN discovery supports IP or hostname addressing methods for the server.

Cellular Discovery Server : When transmitting discovery messages over a cellular network
the information is sent to the public IP address of the discovery server and returned to the
public IP address of the recorder.