MobileView 3008, Installation Manual

Page: 60 / 117

Chapter 4: DVR configuration
54 MobileView 3012 Series Installation Manual
Network Connection
Direct PC Connection through Crossover Network Cable
The point-to-point connection of MobileView 3012 DVR and PC requires a
crossover (crossed) network cable. This type of connection is ONLY used for
direct connection to a single PC. Make sure that the PC is equipped with a
10/100 Mbps compatible network connection.
Figure 48: Direct PC Connection
Final Installation Process
Once you have completed the basic wiring connections, you are ready to turn on
the MobileView 3012 DVR. Simply plug in the power source. The power led will
light up if power is normal. Once the system has finished loading, you can begin
to set up the menu options for the MobileView 3012 DVR.
Note: When the MobileView 3012 DVR is placed in an environment where the
temperature is under -0C
°
, the MobileView 3012 DVR will NOT turn on
immediately. The heater will heat up the MobileView 3012 DVR until the
temperature reaches -0C
°
. The MobileView 3012 DVR will only turn on when the
temperature is above -0C
°
.