Remote - Web Browser Session
MA 850A1A1 Installation and Configuration Guide
29
•
Hardware Address
– MAC address
•
Additional identification parameters that may be available
3.
For networks with DHCP:
•
The dynamically assigned IP Address will also be listed in the
IP Address
column.
4.
For networks without DHCP:
•
Disregard the data displayed in the
IP Address
column and assign a Static IP address
according to Assigning a Static IP Address, page 29.
What next ?
Define the SNMP parameters according to Configuring the SNMP Parameters, page 33.
4.2.1.3
Assigning a Static IP Address
NOTE:
This procedure requires the MAC address of the MA 850A1, which is found on the label
located at the rear of the unit.
Perform the following procedure for each of the MA 850A1 units listed in the
Lantronix DeviceInstaller main window which are to be manually assigned IP
Addresses.
1.
Select the MA 850A1 unit and click the icon
Assign IP
in the toolbar.
Figure
4-5. Assigning Static IP Address
The Device Identification window appears, showing the MAC address of the selected MA
850A1 unit.
