MA 850A1 Installation and Connections
MA 850A1A1 Installation and Configuration Guide
17
9.
Connect the coax
antenna
cables to the MA 850A1 unit antenna ports on
the MA 850A1 front panel (section
10.
Fit 50 ohm terminators on all unconnected SMA, AP and antenna ports.
11.
Connect the network connection to the MA 850A1 rear panel network port.
NOTE:
Each unit is pre-assigned an IP address. The address can be modified anytime through a
remote connection according to the procedure described in section
3.3.3
Mounted onto an MA 1200 / MA 1000 Installation
The installation varies depending on whether the MA 850A1 is to be added to an existing
installation of MA 1200 and MA 1000 or if this is a new installation:
•
New installation - install the
MA 850A1 first and mount the MA 1000 followed by the MA
1200 on top of the MA 850A1;
•
Existing installation - install the MA 850A1 on top of the MA 1200.
As an existing installation
In this type of installation, the MA 850A1 is assembled onto the MA 1000 RHU using a special
bracket.
1. Secure the supplied bracket to the top of the MA 1200 add-on.
2. Assemble the MA 850A1 on top of the bracket.
Figure
3-3. Connection of MA 850A1 and MA 1000 Service Ports
MA 1200
MA 850A1
MA 1000
