UM-1000, Revision 2.2
1
Chapter 1.
Introduction
1.1 About MobileAccess 1000/1200™
MobileAccess™ 1000 family of products provides seamless coverage for voice and
data wireless services in difficult indoor environments where steel, concrete and
earth block RF signals, or in high-rise buildings where reception of multiple signals
causes interference.
The MobileAccess™ converged wireless networks solution is designed to serve
multiple wireless services through a single common cabling infrastructure.
Homogeneous coverage is provided by antennas connected to Remote Hub Units
(RHUs) distributed throughout the coverage area.
The MobileAccess™ infrastructure is protocol-independent and can simultaneously
serve various services. Built-in alarm and control capabilities that enable remote
monitoring and control of the system elements (including antennas).
Features
•
Single cabling and antenna system for all services and frequency bands
•
Support for all current and future voice and data wireless services such as
PCS/CELLULAR, TDMA, CDMA, GSM, future 3G protocols, Paging, iDEN
and 802.11 (a,b,g) Wireless LAN
•
Upgradeable to include additional services
•
Eliminates RF interferences occurring where multiple antenna systems are
used to serve multiple services
•
Enables fast deployment for corporate enterprises, property owners and
WSP’s of new services
•
Reduces tenant disruption
•
Low power required by the system eliminates the need for high power
BTS/RBS, reducing operator expenses
•
Provides both local and remote monitoring and control capabilities
•
Software programmable parameters including output power, AGC (on/off and
levels), and system gain
•
Real time component setting capabilities for optimal performance (aging,
temperature, optical connectors, etc.,)
•
Modular design architecture
Summary of Contents for 1000 System
Page 10: ......
