MobileAccess 1000-CELL-4E, Installation And Configuration Manual, Page: 40 / 43

Appendix: System Specifications
MA 1000 Installation and Configuration Guide 32
MA 1000 System Specifications
Base Unit Specifications
RHU Specifications
Add On
Models: 4 ‐ port model, 8 ‐ port model
Supported services: Wideband device supporting all services supported by MA systems
RF (total Input): 10 dBm max
Power:
Input power 20 to 48V DC
Power consumption 14W (8 ‐ port BU)
RF connections N ‐ type Female, 50 ohm – interface to RIU or to passive
BTS interface
Optic connections Four or eight (depending on the model) SC/APC optic connections
Remote management SNMP, NMS via connection to the MA ‐ 410, MA ‐ 430 or SC ‐ 450
controller
Physical
Dimensions 48.26x4.44x29.97cm (19”x1Ux11.8”)
Weight 3Kg (6.6 lb)
Supported services: Two services corresponding to the model
Power:
Input power 20 to 48V DC
Power consumption 29W
RF connections To antennas: N ‐ type Female, 50 ohm
To Add ‐ on: SMA 50 ohm
Optic connections SC/APC optic connections
Remote management SNMP, NMS via Base Unit connection to the MA ‐ 410, MA ‐ 430 or SC ‐
450 controller
Physical
Dimensions 27.9x24.1x4.5cm (10.98”x9.5x1.75”)
Weight 2.8Kg (6.2 lb)
Supported services: Single service corresponding to the model
RF Connections: To RHU: SMA 50 ohm
Power:
Input power 25 ‐ 48VDC
Power consumption 50W
Remote management SNMP, NMS via RHU connection
Physical Dimensions 27.9x22.0x6.9cm (10.98”x8.66”x2.71”)
Weight 2.8Kg (6.2 lb)