background image

 

29

OPERATION LOG
OSD LANGUAGE
MENU BACKGND
BUZZER
PASSWORD
SETUP PWD
DEFAULT
SD SETUP

VERSION

SYSTEM

   

 MAIN PAGE

SAVE

LOAD

 

 

 

 

 

 

 

 

Save the whole setting into the SD card: 

 

Insert an SD card into the SD card slot. 

 

Press the

 SETUP 

button to enter the setup 

mode. 

 

Highlight 

SYSTEM

 and press the 

Enter

 button 

to enter the 

SYSTEM SETTING

 page.   

 

Set 

SD SETUP

 to 

SAVE

. Then the system 

setting information will be automatically 

saved in the SD card. 

 

Transfer the system setting info of the DVR 

to another DVR: 

 

Insert the SD card which has stored the 

system setting information into the DVR. 

 

Press the

 SETUP 

button to enter the setup 

mode and select 

SYSTEM

 

Highlight 

SYSTEM

 and press the 

Enter

 button 

to enter the 

SYSTEM SETTING

 page. 

 

Then set 

SD SETUP

 to 

LOAD

 

3.5.1.4 Updating the System Software     

Please refer to section 

4.6

 for more details. 

 

 

 

 

 

 

 

 

 

 

 

3.6 The Key Lock Operation 

The Key lock operation protects the unit 

against unauthorized use by disabling the 

entire front panel controls. Press the 

Enter

 

button for at least 3 seconds to lock the unit; 

to release the 

Key Lock

, press the button 

again and enter the pre-set password (or the 

standard password if this is the initial setting). 

 

 

 

 

 

Summary of Contents for DVR-HD1



























































Reviews: