36
SW : 1.21
DATE : Nov 10 2006
KEY : 1.00
REAR: 1.09
VERSION
A-IN:
Detects an alarm input.
LOCK:
Disables the entire front panel controls.
UNLOCK:
Releases the key lock.
UPDATE:
Updates system software.
ACC ON:
Vehicle Ignition ON.
ACC Off:
Vehicle Ignition OFF.
OFF-BL:
Power off because of the low voltage
of battery.
OFF-BH:
Power off because of the high voltage
of battery.
Note: The log keeps an operation history on a revolving
basis because of a limit of 4000. When the log is
full, the newly registered record of an operation
will replace the existing records starting with the
oldest record.
MENU BACKGND:
There are
3
levels of background color
transparency you can choose from: level 1 is totally
transparent, level 3 is opaque, and level 2 is
between levels 1 and 3. The background color is
used in the setup menu and search functions.
BUZZER:
This option determines the embedded buzzer will
sound a tone to signal the following situations. A
tone lasts about two seconds long.
ON:
Enables the buzzer.
OFF:
Disables the buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Key lock function enabled/disabled
Power on /off
PASSWORD:
This option allows you to set a password to prevent
any unauthorized re-formatting of the hard disk
drive and to unlock the entire front panel button
controls. The standard password is “9999”.
OLD PASSWORD:
Enter the pre-set password (or
the standard password if this is the initial
setting) to access the password setting
system.
NEW PASSWORD:
Enter a 4-digit-number
password of your choosing which will
replace the pre-set password (or the
standard password “9999”).
SETUP PWD:
When this option is on, the user must pass the
password check before entering the setup menu.
ON:
Enables the password protection for the setup
menu.
OFF:
Disables the password protection for the
setup menu.
DEFAULT:
This option allows you to reload the factory default
setting. Please do note that the password cannot
be changed in the factory default setting.
SD SETUP:
The DVR offers a quick setup method by using an
SD card. If the user wants to set up a number of the
same devices with the same settings, he can save
the whole settings to an SD card, and then transfer
them to another DVR.
SAVE:
Saves the whole setting to the SD
card.
LOAD:
Loads the whole setting from the SD
card.
VERSION:
This item is in the setup menu: it shows the BIOS
version, the software version, the last updated date,
and the software version of the key board and the
rear board.
