English
- 102 -
Options and functions of the TV menu
Storage Mode
(optional)
Enables or disables the Demo mode..
BISS Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need
to enter BISS key on a broadcast, you can use Biss Key setting located in the Other
Settings menu. Highlight Biss Key and press OK to enter keys on the desired broadcast.
Turn on mode
This parameter configures preferences of the power on mode.
Always enabled : the television comes on when the main power on/off button is pressed.
Standby: the television always comes on in standby mode. / Last view : the television
comes on on the last channel/source selected.
Installation
Automatic channel
search
If you wish to install or update new channels, you can use this menu. It displays
automatic setting options.
Digital antenna :
Searches and stores DVB channels.
Digital cable :
Searches and stores DVB cable television channels
Analogue :
Searches and stores analogue stations.
Analogue and digital antenna :
Search
and store DVB and analogue channels.
Analogue and digital cable :
Search
and store analogue and DVB stations..
Satellite: Searches and stores satellite
stations.
Automatic channel
search
Used to search or directly store a channel if the frequency is known.
Network channel
search
Searches channels related to the transmission system.
Fine tune (analogue)
You can use this option to fine-tune analogue channels. It is only available if
analogue channels are stored.
Initial Installation
Deletes all television settings and takes you back to the first installation.
FRANSAT
Displays Fransat options.
Parental Control
Displays parental control options. Enter the PIN number you have defined in the
initial installation to view current settings..
System Information
Displays system information.
Network Information
Displays current satellite network information.
CAS-Module
Displays current CAS module information.
Upgrade
Displays software upgrade options.
Install and Retune
Displays Fransat installation options.
Channel list
Use of the channel list
You can configure the channel list by moving, deleting, renaming and locking them to your liking.
Setting of parental control settings
To prevent certain programs from being watched, channels and menus can be locked through the parental control system.
To display lock menu option, enter the PIN code. By default, the set factory code is
0000
. After entering the
appropriate PIN code, the Parental control settings menu will be displayed :
Menu lock
: The Menu lock option enables or disables access to the menu.
Maturity lock:
After installation, this option searches information related to parental programs and if this
parental level has been disabled, access to broadcast is not enabled.
Parental control lock
: When the Parental lock option is selected, the television can only be controlled with
a remote control. In this case, the control panel buttons will not be active.
PIN code setting
: Defines a new PIN code.
