Maintenance
7.3. Packing for transportation
This section describes how to pack the robot for transportation.
7.3.1. Original packaging
Use the original packaging materials when transporting the robot.
The packaging materials are:
• The bottom of the box (the pallet).
• The lid of the box (the ramp).
• The walls of the box.
• The wheel stop board.
• Protective foam blocks: Side blocks and the top layer.
• Protective corner braces. The braces prevent the robot from being damaged by the transport straps.
• Screws.
7.3.2. Packing the robot for transportation
To pack the robot for transportation:
1. Shut down the robot. See section
Shutting down the robot on page 22
2. Open the rear maintenance hatch.
MiR500 user guide, 2019/03, rev.1.1
59