B40 DC/AC
Operation
11
z
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze and
can therefore destroy glass containers.
z
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤
Place the cooler on a firm base.
Connecting the cooler to 12 V (thermoelectric mode)
I
NOTE
In thermoelectric mode, the thermostat has no function and the
device
cannot
deep freeze.
➤
Make sure the cable between the cooler and the battery is protected by a
fuse (maximum 5 A).
➤
Plug the 12-V connection cable (fig.
1
2, page 3) into the cigarette
lighter socket or a 12-V socket in the vehicle.
✓
The cooler starts cooling the interior.
➤
To switch off the cooler:
– Disconnect the plug.
– Wind the cable around the two holders on the back of the device for
storage.
I
NOTE
Disconnect the cooler from the battery when the engine is not
running, as otherwise the battery will run down.
Connecting the cooler to 230 V (compressor mode)
➤
Connect the 230-V connection cable (fig.
1
3, page 3) to the 230-V AC
mains supply.
➤
Open the lid of the thermostat (fig.
2
3, page 3) by pressing down on it.
I
NOTE
Press down on the lid again to close it.
➤
Turn the thermostat (fig.
2
3, page 3) clockwise to the required position.
_B40.book Seite 11 Dienstag, 28. September 2010 11:11 11
Summary of Contents for B40 DC/AC
Page 2: ......
Page 3: ...B40 DC AC 3 2 3 1 1 0 MAX MIN 1 2 3 2...
Page 4: ...B40 DC AC 4 1 3...
Page 103: ......
