4
Pins
Nut
Cap
Inner Rod
Your wheelchair is usually delivered fully assembled, folded, and with the rear
wheels mounted. A few simple steps are enough to prepare it for use. The rear
wheels of
Models S-20 Sevilla and Model S230 Sevilla
were unassembled, its
wheels and axles are labeled with a letter
R
(Right) and
L
(Left) for a proper
assembly. Please refer step
3.1.
to assemble firstly before use.
The content in the packaging carton box is as follows:
Folded wheelchair.
Disassembled rear wheels
(Models S220 Sevilla and S230 Sevilla)
attached to the wheel structure.
Accesory box:
Footrest.
Heel
strap.
Pre-Adjusted Quick-Release axles identified with
R
(Right) and
L
(Left).
Wrenches (Allen or hexagonal depending on the wheelchair
model)
Instructions for use.
Press and hold the cap of axle, insert the center hole of rear wheel, and then insert
the hole of wheelchair frame. (Figure ).
Install the left axle and left rear wheel to the left side of the chair and install the
right axle and right rear wheel to the right side of the chair. To determine about the
sides of the wheelchair, unfold the chair and stand behind it, holding the handles:
Right and left side will be your right and left hands subsequently.
Install rear wheels by Quick-Release axles. (Figure )
3.1.
1.
2.
3.
1
2
Min. effective critical length
Max. effective critical length
Total length
1
3. DELIVERY AND PREPARATION FOR USE
ES
EN
FR
IT
DE
PT
S220 Sevilla | S230 Sevilla
Summary of Contents for S220 Sevilla
