5
3. USE OF INPUTS
It is possible to connect external sensors to the inputs. As a standard reaction after a triggered
input, the Mobeye PowerGuard sends an SMS text message to the preset numbers and calls
these numbers.
Insert the 2 wires of an external sensor through the hole of the enclosure to the inside part and
next in the two connectors of input 1. It does not matter which wire is connected to which
connector. If necessary the wires can be extended up to 5 meters using appropriate wire material.
When using a second input, connect this to input 2.
As default the inputs are programmed as Normally Open (NO)
contacts. This means the inputs are triggered in case the input is
closed during at least 1 second. In case the contact should be
Normally Closed (NC), please refer to paragraph 4.4.4. In case a
sensor should be activated shorter or longer before evoking an
alarm, please refer to 4.4.7.
1
2
