12
6. MOUNT THE GSM MODULE HOUSING AND PERFORM A TEST
6.1 MOUNT THE GSM MODULE HOUSING TO THE CEILING
Mount the housing in which the module is fixed to the desired place to the ceiling,
using the plugs and screws which can be found inside the Ei Electronics box. Please
refer to the manual of the Ei Electronics detector for the ideal location and
installation method.
6.2 CONNECT THE EI DETECTOR AND CLOSE THE COVER
Remove the back cover from the Ei Electronics detector. The
GSM communicator will be used as back cover.
Press the green cabled connector to the pins of the Ei
Electronics detector. Next to the pins the text 1 2 is written.
Be sure that the (in most situations) grey connector in the Ei
Electronics detector was removed.
Hold the
EI detector to prevent tension on the wires!
Bring the Ei Electronics detector and the back cover with GSM module to each other
at the correct position and turn the detector gently clockwise until it is closed and
locked. In the EI detector a red light will flash regularly.
