IV - TIME SETTING MENU
4.1 Mobaline synchronised clock
After the clock has been connected to the Mobaline, the screen remains blank during 8-10
seconds before displaying 0h00. The radio pictogram flashes every seconds.
The time on the slave clock Cristalys Mobaline will be set automatically over a period of 4-5
minutes and the radio pictogram is fixed.
After a reset, a time setting or change in configuration, the clock searches until it get
synchronised.
Remark : See the chapter “Technician Menu”
page 20 to parameter to time distribution.
4.2 Time and date setting in independent
mode
The [SEL] button enables you to shift between
the different menus and the [+]
1
button enables
you to scroll through the setting values.
Each time [SEL] is pressed, the option that is
flashing is validated.
To set the clock to the correct time, proceed as
follows :
1. a
On installing the batteries or on the initial powering up, the time is
initialised at 00h00 01/01/2000. Press [SEL] for 2 seconds : the
hour flashes.
b
Press [+] until the required hour is shown (the display of hours takes
account of the 12 /24 hr mode, see paragraph 5 page 11).
2. a
Validate the hour by pressing [SEL] : the minutes flash.
b
Press [+] until the required minute is displayed. To synchronise your
clock to the nearest second, select the current 1 and as
the minute pips, validate by pressing [SEL] ;
The internal second counter is then reset to zero and starts up.
3. a
Having validated the minutes : the year flashes.
7
Sel.
C
°
Reset
(1)
Maintaining pressure on the [+] button for longer enables you to increase the values rapidly
(minutes, hours, days, etc).
