VII - TECHNICIAN MENU
Access to the technician menu is via the two push buttons [SELECT] and [+] located on the
back of the clock. The [SELECT] button is above the [+] button.
Proceed in two stages.
1.
Press the [SELECT] button, and while holding it down, press [+] for more than 3 seconds to
go initially to Configuration menu.
2.
Press the [SELECT] button, and while holding it down, press [+] for
more than 7 seconds to go to Technician menu. The programme
version for the clock is displayed.
3.
Press the [SELECT] button to display the menu for the type of
synchro. The [+] button enables you to choose between
Ind
and
Sync
(if the synchro card is connected).
Ind
: independent mode (Mobaline card is desactivated).
Sync
: activation of the Mobaline card.
4.
Press [SELECT], according to the clock’s option and the previous
selection :
Ind :
the programme of the clock go directly to the step “Test
display”.
Sync (Mobaline) :
The Radio Reception menu is displayed.
The radio pictogram flashes to indicate that the search is
under way. The display shows the construction of the time
message as and when the data arrives.
5.
Press the [SELECT] button. Adjusting the temperature offset.
Variation, using the [+] button between –9.5°C and +9.5°C by
increments of 0.5 (on leaving the factory, an adjustment can be
made). The current temperature is displayed on the second line,
taking the offset in consideration. The temperature is read every 10
seconds.
6.
Press [SELECT] to obtain the Test display menu. This menu enables
you to check that all the clock segments are giving the correct
20
