MOBA Farmpacker M100T, Training Manual

Page: 46 / 59

-
Release 5
46 Training manual , MOBA Farmpacker M100T
7. After erasing all the settings new settings have to be entered.
NOTE
a
Don’t forget to set the farmpacker speed.
9.4 Erase Firmware software
NOTE
a
This must be avoided at any time, it will completely delete al software inside.
NOTE
a
This must be carried out only by specially qualified engineers
NOTE
a
The software can only be restored by Moba service engineers.
You will enter this option as follows:
1. Switch off the power
2. Press on the lower left corner of the screen
3. Switch on the power
4. After a few seconds the display will show the following:
“Erase Firmware?
5. Press right bottom corner to confirm”
6. Confirm only if you are absolutely sure that this is your intention.
NOTE
a
If you by accident entered this mode, do nothing and the display will automatically exit without
any change.
9.5 Erase Application software
NOTE
a
This must be avoided at any time, it will completely delete your application software.
NOTE
a
This must be carried out only by specially qualified engineers
NOTE
a
The software can only be restored by Moba service engineers.
• You will enter this option as follows:
1. Switch off the power
2. Press on the upper right corner of the screen
3. Switch on the power
After a few seconds the display will show the following:
“Erase Application?
4. Press right bottom corner to confirm”