Mini Blender
- English manual
11
EN
TROUBLESHOOTING
- Engine does not start or attachment does not rotate.
Make sure the tabs of the cups are in the notches and turned clockwise.
- Food is cut unevenly.
You cut too much food at once or you do not pulse properly. Reduce the
amount of food in the cup.
- Food is cut too fine or too watery.
The food is processed too much. Do not use the appliance for as long
for better results.
- You cannot make snow from ice cubes.
For best results, use ice straight from the freezer. Try to use the device
briefly several times instead of one long time.
Make sure the cup is completely dry before adding the ice.
- The cup is leaking.
Make sure that your lid or blade unit is correctly mounted on the baker.
Leakage can occur if it gets out of position while mounting on the cup.
Turn the lid slightly clockwise.
- The device does not switch on.
Make sure the device is connected to the power outlet.
Check that the blade unit is correctly mounted on the cup and has not
moved out of position.
- The device does not switch off.
Unplug the power cord and contact customer service for support.
- The appliance does not mix well.
Pulse the ingredients for best results. Press the cup at short intervals to
blend and cut evenly. With frozen ingredients, pulse repeatedly for 2-5
seconds.
- Lid / knife unit does not connect properly to the cup.
Place the cup on a flat surface. Place the lid or blade unit on top of the
cup and position the threads so that the lid / blades are flat on the cup.
Turn clockwise so the lid / blades stay flush with the cup until you have
a good seal.
