Mini Blender
- English manual
8
EN
USE (2/2)
5. Turn the jar upside down and place it onto the motor base, aligning
the tabs on the jar with the motor base, aligning the tabs on the jar with
the motor base. Turn it clockwise, the unit is ready for use.(Fig. 3)
6. When you have reached your desired consistency, stop the
appliance by turning the jar counterclockwise(Fig. 4) and pull straight
up to remove.(Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add ingredients past
the “Max” fill line.
7. Turn the jar upright and remove the Blade Assembly by twisting the
blade assembly counterclockwise. Be sure to store the Blade Assembly
attached to an empty jar when not in use.
8. Place the Sip & Seal lid onto the jar, twist to seal and enjoy!
9. Make sure that the motor base is unplugged when not in use.
SAFETY FEATURES
Built-in safety lock
The blender has a built-in safety lock feature, this ensures that you can
only switch on the appliance while the cup and the blade subassembly
are assembled on the motor base securely. If the appliance is correctly
assembled, the built-in safety lock will be unlocked.
IMPORTANT
: In the base of each blade’s collar, there is a silicone
gasket seal that creates an airtight fit with the jars. After dishwashing
and before each use, always check to make sure the gasket is properly
in place, as the heat from some dishwashers may cause the gasket to
become loose.
WARNING
: Do not operate the motor continuously for more than
60 seconds at a time. Allow the motor to rest for 180 seconds before
continuing.
NOTICE
: If the blade is not running smoothly, stop the product and add
some liquid, or reduce the ingredients in the cup.
NOTE
: To prevent product overheating, dry ingredients must not be
processed for more than 30 seconds at a time.
