Configuration Software
13.0
10
Attention: When a parameter is changed without clicking the Apply button, the new values are
not remembered. Once another parameter setting is selected, the previous parameter will go
back to the original setting.
Clicking on the
Reset
button will set the parameter value back to the default value. Click
Apply
to store locally and
Save
to make the change to the device.
10. When your Access Level is set to
Dealer
, the categories
Log
and
Diagnostics
will be displayed
as well.
•
When
Log
is selected, an overview of all occurred errors and/or actions will be displayed
with a number of times that they occurred, and a Reset button to set the counter back
to zero.
•
When
Diagnostics
is selected, you will be able to run a Field Diagnostic Test. Click on
Field Diagnostic Test
and then
Run Test
to start the Field Test.
