![MMM CO2 Series Instructions For Use Manual Download Page 13](http://html1.mh-extra.com/html/mmm/co2-series/co2-series_instructions-for-use-manual_1813962013.webp)
Instructions for use
CO
2
CELL Comfort 190_np_en 1301_mmm_V1.02
11
6.6.3
LOGGING
OUT
On the utility menu screen, press and hold the log out icon:
You are logged out and the padlock icon is now locked:
No changes to the incubator can be made without logging
back in.
For the Comfort 190S incubator only:
At this point the magnetic door locks are activated, stopping
any unauthorised access to the incubator.
6.6.4
DISABLING
SECURITY
Press the utility icon:
When prompted, enter the user name and password.
To disable security press:
Icon changes to:
Security is now disabled.
7
SD
CARD
DATA
LOGGING
The incubator is supplied with a 2 GB SD card. This
SD card is pre-formatted to work with the
controller’s operating system.
Only cards supplied by MMM can be used. Using
any other type of card will not work with the
incubator and will cause the controller system to
crash.
The controller can log to a removable SD card located on
the front of the incubator.
Every 30 seconds the controller records the following data
to the SD card:
Date & Time
Chamber temperature set point (SP);
Chamber temperature process value (PV)
Door set point (SP);
Door process value (PV)
Door set point (SP);
Door process value (PV)
CO
2
set point (SP);
CO
2
process value (PV)
$Q\HYHQWVDUHDOVRORJJHGLQDVHSDUDWH¿OH
The data is stored in Excel format making it very easy to
read and use the data with a PC.
Data is only logged when the incubator is powered; however
data is not lost when power is removed.
7.1
START
LOGGING
If the card is already inserted when the incubator is powered
up then logging will start automatically.
If the SD symbol is grey
then the incubator is
logging. If it is red then it is not logging.
Press the red SD icon
in the Utility Menu. The Status
screen will state that the card is removed.
Insert the SD card into the slot to the right of the controller
(label side closest to controller).
The SD Card status screen shows that the controller is
locating the data and preparing to log. This can take from a
IHZVHFRQGVWRDIHZPLQXWHVGHSHQGLQJRQGDWD¿OHVL]H
Please be patient.
:KHQWKHFRQWUROOHUKDVORFDWHGWKHORJ¿OHWKHVWDWXVVFUHHQ
shows that it is logging data:
Press
to return
to the main screen
Summary of Contents for CO2 Series
