FX312 & FX412 VERSION 2.0
MLR ELECTRONIQUE
22
The displayed information and the representation diagrams are identical to those of the GOTO
WAYPOINT function. The only difference is located on the bottom right of the screen where the
name of the waypoint is replaced by the number of the active route along with the departure
waypoint name and the next waypoint name in the route. The advance to the next waypoint is
selected using the Arrival Alarm function, when the waypoint alarm distance has been reached
the next waypoint is automatically selected.
In the above example the vessel goes to waypoint WPT001. The GOTO ROUTE function
calculates the required navigational information to automatically move to waypoint WPT002
when the vessel moves into the circle of radius R, or when it crosses line B1 - B2 and so on,
until the last waypoint. The radius R is the distance programmed in the arrival alarm (see
NAVIGATION MENU).
4.2. – DEACTIVATE THE GOTO ROUTE FUNCTION
From the GOTO ROUTE function, press the Menu key then press the key 1 (or select 1-
DEACTIVATE and press Enter) to deactivate the GOTO ROUTE function.
4.3. – DISPLAY MODE SELECTION: DATA, COMPASS, 3D ROAD OR RADAR
From the GOTO ROUTE function, press the Menu key then press the key 2 (or select 2-GOTO
DISPLAY and press Enter). Select the display mode using the
arrow keys then press
Enter.