MLB-Z4001 Terminal User Manual
12
Rev 1.0
3.2
Radio Interface (Type SMA Connector Female) - RF Antenna
Figure 4: Antenna Connector for MLB-Z4001
The connection of the antenna or other equipment must be decoupled from DC voltage.
For optimum RF performance, the MLiS Terminal has to be connected to an external RF antenna
matched to 50ohms including other connecting cables across the operating frequency bands. Please
use a SMA Male connection for the terminal.
Choose suitable types of low attenuation coaxial cables if possible. In general, the ohm types RG174 or
RG58 50 can be used. Avoid excessive cable length of > 10 meter
Compatible RF antennas (PCB patched or Monopole type) are available for order, please refer to
accessories document.
Summary of Contents for MLB-Z4001
Page 1: ...MLB Z4001 Terminal User Manual 1 Rev 1 0 MLB Z4001 Ethernet to 900 MHz RF Modem USER MANUAL...
Page 19: ...MLB Z4001 Terminal User Manual 19 Rev 1 0...
Page 21: ...MLB Z4001 Terminal User Manual 21 Rev 1 0 Step 3 Under the Advanced Tab...
