MLis MLB-E4200 Series, User Manual

Page: 94 / 98

94
1. Actual Consumption:
In this mode the ports are shut down when the actual power consumption for all ports exceeds the
amount of power that the power supply can deliver or if the actual power consumption for a given
port exceeds the reserved power for that port. The ports are shut down according to the ports
priority. If two ports have the same priority the port with the highest port number is shut down.
Port Priority: Critical > High > Low.
When priorities are the same, low number of the port has higher priority.
2. Reserved Power:
In this mode the ports are shut down when total reserved powered exceeds the amount of power
that the power supply can deliver. In this mode the port power is not turned on if the PD requests
more power than available from the power supply.
Other Setting Parameter
1. PoE Power Supply
For being able to determine the amount of power the PD may use, it must be defined what amount
of power a power source can deliver. Valid values are in the range 0 to 240 Watts.
2. PoE Mode
The PoE Mode represents the PoE operating mode for the port.
Disable : PoE disabled for the port.
Enable : Enables PoE for the port.
Schedule : Enables PoE for the port by scheduling.