37
Configuration:
Step1.
Go to Configuration -> VLANs -> Port VLAN configuration page specify the VLAN membership as
follows:
Step2.
Transmit unicast packets with VLAN tag 100 from Port 1 to Port 2 and Port 7. The MLB-E4200
should tag it with VID 100. The packet only has access to Port2. For Port 2, the outgoing packet leaves
as a tagged packet with VID 100.
Step3.
Transmit unicast packets with VLAN tag 200 from Port 1 to Port 2 and Port 7. The MLB-E4200
should tag it with VID 200. The packet only has access to Port7. The outgoing packet on Port 7 is
stripped of its tag as an untagged packet.
Step4.
Transmit unicast packets with VLAN tag 100 from Port 2 to Port 1 and Port 7. The MLB-E4200
should tag it with VID 100. The packet only has access to Port1. For Port 1, the outgoing packet leaves
as a tagged packet with VID 100.
Step5.
Transmit unicast packets with VLAN tag 200 from Port 7 to Port 1 and Port 2. The MLB-E4200
should tag it with VID 200. The packet only has access to Port1. The outgoing packet on Port 1 will leave
as a tagged packet with VID 200.
Step6.
Repeat the above steps using broadcast and multicast packets.
CLI Command:
Summary of Contents for MLB-E4200 Series
