4
•
Tighten expansion bolt nuts but allow enough space for the bracket to mount
•
Remove the driver housing via the 4 Allen screws (see Fig 3)
Fig 3
•
Align the mounting bracket with 2 of the driver housing screw pillars (see Fig 4)
Fig 4
•
Position the driver housing into the bracket ensuring all Allen screw holes are correctly aligned and fasten down
the 4 Allen screws (see Fig 5)
Fig 5
Remove the 4 Allen screws
Fasten down Allen screws
•
Lift the fitting up to the expansion bolts and slide into the bracket (see Fig 6)
Fig 6
•
Tighten the 2 expansion bolts to secure the luminaire to the surface
To wire the luminaire without a dimmer (see fig 7)
Fig 7
To wire the luminaire with a 1-10V dimmer (see Fig 8)
Live - brown
Earth – green/yellow
Neutral - blue
Blue: Dim +
White: Dim -
Neutral - blue
Earth – green/yellow
Live - brown
•
Lift the fitting up to the expansion bolts and slide into the bracket (see Fig 6)
Fig 6
•
Tighten the 2 expansion bolts to secure the luminaire to the surface
To wire the luminaire without a dimmer (see fig 7)
Fig 7
To wire the luminaire with a 1-10V dimmer (see Fig 8)
Live - brown
Earth – green/yellow
Neutral - blue
Blue: Dim +
White: Dim -
Neutral - blue
Earth – green/yellow
Live - brown
• Position the driver housing into the bracket ensuring all Allen screw holes are correctly
aligned and fasten down the 4 Allen screws (see Fig 5)
• Lift the fitting up to the expansion bolts and slide into the bracket (see Fig 6)
• Tighten the 2 expansion bolts to secure the luminaire to the surface
To wire the luminaire without a dimmer (see fig 7)
Fig 5
Fig 6
Fig 7
