manualshive.com logo in svg

ML Knightsbridge HBL Series, Installation And Maintenance Manual

Share
Download
ML Knightsbridge HBL Series Installation And Maintenance Manual Download Page 2

2

These instructions should be read carefully and retained after installation by the end user for 
future reference and maintenance.
These instructions should be used to aid installation of the following products:
HBL100 / HBL150 / HBL200 / HBL240

GENERAL INSTRUCTIONS

SAFETY

INSTALLATION

•  Installation of this luminaire should only be carried out by a qualified electrician or competent 

person to the latest Building and current IEE Wiring Regulations (BS7671)

• Please isolate mains prior to installation/maintenance
•  Check the total load on the circuit (including when this luminaire is fitted) does not exceed the 

rating of the circuit cable, fuse or circuit breaker

•  Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for 

installation

• This product series is Class I and requires an earth
• This product series is IP65 rated (recommended indoor use only)
• This product is dimmable via a 1-10V dimmer 

•  Provide power to the required point of installation. Suitable IP rated junctions boxes should be used 

where required

Suspension mounting

• To suspend the fitting, screw the mounting hoop into the top of the luminaire (see Fig 1)

HBL series 

These instructions should be read carefully and retained after installation by the end user for future reference and 
maintenance. 

These instructions should be used to aid installation of the following products: 

HBL100 / HBL150 / HBL200 / HBL240 

 

SAFETY 

•

 

Installation of this luminaire should only be carried out by a qualified electrician or competent person to the 

latest Building and current IEE Wiring Regulations (BS7671) 

•

 

Please isolate mains prior to installation/maintenance 

•

 

Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the 

circuit cable, fuse or circuit breaker 

•

 

Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for installation 

•

 

This product series is Class I and requires an earth 

•

 

This product series is IP65 rated (recommended indoor use only) 

•

 

This product is dimmable via a 1-10V dimmer  

INSTALLATION 

•

 

Provide power to the required point of installation. Suitable IP rated junctions boxes should be used where 

required 
 

Suspension mounting 

•

 

To suspend the fitting, screw the mounting hoop into the top of the luminaire (see Fig 1)  

 

Fig 1 

 

Bracket mounting 

•

 

Using the bracket as a template, mark the location of the fixing holes, drill 2x 10mm holes ensuring not to 

infringe with any joists, gas or water pipes or electrical cables 

•

 

Using a hammer, tap the expansion bolts into the 10mm fixing holes (see Fig 2) 

 

Fig 2 

Screw down 

mounting hoop 

Fig 1

Summary of Contents for Knightsbridge HBL Series









Reviews:

No comments

Brands by name

Popular brands

Load more brands