Mounting battery operated receiver
• Measure the distance between the fixing centres on the rear of the receiver and mark the
location for, and drill the fixing holes ensuring not to infringe with any gas/water pipes or
electrical cables
• Using the screws and wall plugs provided insert the screws leaving the head of the screw
exposed
• Attach the receiver to the two exposed screw heads
Pairing
• Select the desired melody using the next / previous melody buttons
• Hold and press the volume control button for about 5s until a “ding-dong” is heard and
the LED indicator starts flashing: you are now in pairing mode
• Press the bell push or activate the PIR sensor within 5 seconds
• Press the bell push or activate the PIR, the selected melody should sound to confirm
pairing is successful - if not repeat the pairing process
• Extra receivers and bell pushes can be added by following the same pairing procedure
