• The body of the product should not rest directly on the ground
• The pre-installed cable supplied is for above-ground use only. Cables that are to be routed within walls or
below ground must be protected by means of suitable conduit or trunking
(see Fig. 1)
Fig. 1
• For wall mounting installation, unscrew the spike from
the luminaire. Mark and drill the hole for the mounting
bracket ensuring it does not infringe with electrical
cables, or water / gas pipes
• Connect the mains supply, Live (brown), Neutral (blue)
and Earth (green/yellow)
• Remove the four screws on top of the fitting and pull
the bezel away from the fitting (see Fig. 2)
Fig. 2
