MKS ToolLink CDN466, User Manual

Page: 21 / 30

ToolLink User Manual
MKS Instruments, Inc. Page 21 of 30
Connection 2 Consumed Connection ID: 10xxxxxx101
xxxxxx = Node Address.
Production and Consumed Sizes – Attributes 7 and 8
The Production and Consumed sizes will change based on
Watch Dog Timeout Activity – Attribute 12
0 = Timeout (I/O Messaging default)
1 = Auto Delete (Explicit Messaging, fixed value)
2 = Auto Reset
User Defined (Serial Stream) Object Class Code: 100 (0x64)
The Serial Stream Object model supports a bi-directional serial stream of data. The object includes the
transmit FIFO, the receive FIFO and the serial channel configuration attributes.
Table 19
Serial Stream Class Attributes
Attribute Access Name Type Value
1 Get Revision UINT 1
2 Get Max Object Instance UINT 1
6 Get Max Class Identifier UINT 7
7 Get Max Instance Attribute UINT 18
Table 20
Serial Stream Object, Instance 1 Attributes
Attribute Access Name Type Value
3 Get Receive Data Short_String
Received Massage Data
4 Set Transmit Data Short_String
Message data to
transmit(4)
5 Get/Set Status USINT See Below
6 Get/Set Baud Rate USINT See Below
7 Get/Set Parity USINT See Below
8 Get/Set Flow Control USINT See Below
9 Get Receive Mode USINT See Below
11 Get/Set Start Delimiter String USINT See Below
12 Get/Set Stop Delimiter String USINT See Below
13 Get/Set RX Handshake Enable USINT 1 = Yes, 0 = No
14 Get/Set Receive Counter USINT RXC Receive Message
Counter (0-255)
15 Get/Set Receive Acknowledge USINT (See Below
16 Get/Set TX Handshake Enable USINT 1 = Yes, 0 = No
17 Get/Set Transmit Counter CHAR RXC Receive Message
Counter (0-255)