First version
Rev 1.00
22 Sep 2016
Helios User Manual
27
Use the “Wavelength” dropdown to select the desired wavelength range. In this example there are two available
wavelength ranges, NIR (Near Infrared e.g. 1064nm) and B-G (Blue-Green region, ~450-550nm). Check the datasheet
for your specific model for information about exact wavelength ranges supported.
(Note: some of the following pictures are taken from a previous version of the PC Application, they are for general
illustration only).
Use the “Range” dropdown to select the desired energy range (or scale). Keep in mind that the expected energy
should be lower than this number, but greater than 10% of it.
For example, a laser of 5 kJ should use the 10.0KJ range, but 900 J should use 1.00KJ.
Options
For advanced operations using the commands from the previous chapter, select Options > Terminal. The Terminal
section can be seen at the bottom of the screen. Commands are entered after the ‘$’ sign and are sent by clicking