CONEX-LDS
Controller GUI Manual
4.2.1
Configurable settings
The following table describes all the settings that can be changed by the user.
Parameter
Description
User Input
Default
LoggingConfiguration
Level
Logging level.
Trace is the most detailed setting
wherein the Controller GUI logs
everything. Critical Error is the least
detailed setting, which log errors that
are defined to be critical.
Trace
Detail
Equipment Message
Info
Warning
Error
Critical Errror
Trace
InstrumentInformation
PollingInterval
The polling interval defines the delay,
in milliseconds, between each polling
event.
An Integer
200
NbDigits
Number of digits after the decimal
point.
An Integer
6
Diagnostics
Delay
The time, in milliseconds, between
commands sent to the instrument.
An Integer
200
Charts
BufferDepth
BufferDepth defines the maximum
number of points displayed in the
chart.
200
XMax
XMax defined the maximum X limits
of the position charts.
2000
XMin
XMax defined the minimum X limits of
the position charts.
-2000
YMax
XMax defined the maximum Y limits
of the position charts.
2000
YMin
YMax defined the minimum Y limits of
the position charts.
-2000
Models \ InstrumentInfo
InstrumentType
Type of the main instrument
CONEX-
LDS
NoOfInstruments
Number of instruments that could be
connected
1) CONEX-LDS (mandatory)
2) XPS (Optional)
1 or 2
2
Instrument1
Type of the main instrument
CONEX-
LDS
Instrument2
Type of the optional instrument
XPS
CommunicationChannelLDS
The communication channel
USB
USB
CommunicationChannelXPS
The communication channel
TCP
TCP
LDS
XAxisName
User name given for the X axis
X
YAxisName
User name given for the Y axis
Y
XDirection
The axis direction for X axis.
Positive
Negative
Positive
YDirection
The axis direction for Y axis.
Positive
Negative
Positive
XYOrientation
XY Axes orientation
Normal = XY
Inverse = YX
Normal
Inverse
Normal
EDH0331En1032 — 12/18
6
