Safety Instructions
Mini-Convectron Module with RS-485
9
Instruction Manual - 275545
Saf
e
ty Ins
tructions
Introduction
Installatio
n
O
p
e
ra
tion
M
a
inten
ance
Calibration
technician to restore the product to its normal operation.
e.
If the product has been dropped or the enclosure has been damaged.
f.
When the product exhibits a distinct change in performance. This
indicates a need for service.
Replacement Parts − When replacement parts are
required, be certain to use the replacement parts that
are specified by Granville−Phillips or that have the
same characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
Safety Check − Upon completion of any service or
repairs to this product, ask the Qualified Service
Person to perform safety checks to determine that
the product is in safe operating order.
Finite Lifetime − After ten years of normal use or
even non−use, the electrical insulation in this product
may become less effective at preventing electrical
shock. Under certain environmental conditions
which are beyond the manufacturer’s control, some
insulation material may deteriorate sooner.
Therefore, periodically inspect all electrical
insulation for cracks, crazing, or other signs of
deterioration. Do not use if the electrical insulation
has become unsafe.
Be aware that when high voltage is present in any
vacuum system, a life threatening electrical shock
hazard may exist unless all exposed conductors are
maintained at Earth ground.
This hazard is not peculiar to this product.
