mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfield, CT 06002
|
860.769.5500
|
www.mknorthamerica.com
©2017
|
Page 17
8.2 KHL 2045 / KHL 2010
Loosen all bolts and push the entire head (1) inwards (in
the direction of the arrow), in order to create slack in the
timing belt.
Remove the closure strip (3) by sliding the material out of
the end.
This will expose the belt return channel.
Remove the belt return guard (2) by removing all screws.
Do this at BOTH ends of the conveyor.
Next Steps for Belt Removal and Replacement:
• The belt can now be replaced once all auxiliary obstructions are removed.
• To replace belt, slip it over the side of the conveyor and fit into the return channel.
• Reassemble conveyor in the reverse order.
• Track and tension belt prior to use. (see Section 7).
All work to be performed by qualified personnel only.
Conveyor power must be disconnected before replacing the belt.
8
CONVEYOR MAINTENANCE - REPLACING THE BELT
