CobraTig
®
150 Owner's Manual
- Page 12
some basic tube or pipe variables, the CobraTig 150 SM digital controller can
generate and produce a near ideal weld procedure.
The following menu will guide the operator through basic fields of information
entry. Beginning with selections for tube or pipe and diameter and wall
thickness. Additional information can be designed into the procedure that
include different pulse types, up to 5.0 seconds motor delay time, multiple
revolutions, and programming of up to 7 opposing tacks.
Help
Press this button to read a brief description of the APG button
descriptions and functions.
Ignore Entries
Pressing this button at any time during the design of a weld procedure,
will automatically return the program to the MAIN MENU and lose all
entered information.
Accept Entries
Once the first three variables are entered into the APG screen this button
may be pressed, thus bypassing any additional features and changing
directly to the WELD ORBITAL screen.
Previous Entry
Press this button to return to the previous field in order to change the
entered value.
Next Entry
Press this button to jump to the next field in order to change the entered
value or add a new value.
Gas On/Gas Off
This button is used to manually toggle the gas flow either “ON” OR
“OFF”. This button is used to indicated the
status
of the gas flow.
When the button reads “GAS ON”, the gas solenoid valve is open and
the gas flowing.
When the button reads “GAS OFF”, the gas solenoid valve is closed and
the gas is not flowing.
Section 12
Print Menu
At the PRINT MENU, many different aspects of the CobraTig 150 SM can be
printed or modified. Not only can various printouts of weld procedures, list of
procedures, and calibration reports be made but the printer configuration can
be modified to print on command or automatically.
Help
Press this button to read a brief description of the PRINT MENU button
descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.
