CobraTig
®
150 Owner's Manual
- Page 9
Section 9
Recall Program
Press the RECALL PROGRAM in order to access the library of operator
saved weld procedures.
NOTE: If the currently used procedure is not saved, a warning screen
of text will prompt for a ‘YES’ or ‘NO’ answer: this is the OVERWRITE
screen. Anytime there is a potential change to the existing weld
procedure, this screen will appear.
If ‘NO’ is pressed, the screen will return to the WELD ORBITAL screen. If
‘YES’ is pressed, the screen will change to RECALL USER MEMORY.
Help
Press this button to read a brief description of the RECALL menu button
descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.
Weld Orbital
Press this button to return to the WELD ORBITAL screen.
Scroll Left
Each time this button is pressed, the locations of where each weld
procedure is saved will move three number locations to the left.
Locations
The bottom three buttons on this screen indicate the number of the
location where weld procedures are saved. Using the SCROLL LEFT
and SCROLL RIGHT button, will move the locations accordingly to show
the status of each location.
Those locations with the word EMPTY above the number, indicate that
there is no weld procedure saved in that location.
Scroll Right
Each time this button is pressed, the locations of where each weld
procedure is saved will move three number locations to the right.
Those locations with the word EMPTY above the number, indicate that
there is no weld procedure saved in that location.
